Volkswagen ID.3: Information on bulb replacement

Always perform the following activities for bulb replacement in the specified sequence→ :

1. Park the Volkswagen ID.3 vehicle a safe distance away from moving traffic on level and solid ground as soon as possible.

2. Set the electronic parking brake.

3. Switch the lights off.

4. Turn off the turn signal if it is activated.

5. End drive-ready mode.

6. Allow the orientation lighting to turn off.

7. Allow the affected light bulbs to cool down.

8. Check if you can see that a fuse is burnt out (→ Fuses) .

9. Change the affected light bulb according to the instructions→ .

   A light bulb may only be replaced with the same type of light bulb. The respective name will be on the bulb socket or glass bulb.

   Never touch a glass light bulb with bare hands. The fingerprints left behind would vaporize from the heat when the bulb is switched on and condense on the reflector, which would then reduce the headlight brightness.

10. Check the bulb function after a bulb is changed.

    If the bulb does not function, the bulb may not have been inserted correctly, may have fallen out, or the connector may not have been plugged in correctly.

11. After every bulb replacement in the front of the vehicle, have the headlight adjustment checked by an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

WARNING

If the steps described for the bulb replacement are ignored, accidents may occur. Serious injuries may result.

• Always follow the tasks described and observe the general safety precautions.

NOTICE

Removing and inserting trim panels and headlights incorrectly can damage the Volkswagen ID.3 vehicle paint and body.

• Always be careful when removing and inserting the trim panels and headlights.

PlacementReplacing bulbs in LED headlights