Volkswagen ID.3: Sockets in the vehicle

Do not exceed the maximum power of the sockets. The power draw of the external devices is indicated on their identification labels.

12 V socket

Fig. 1 In the luggage compartment on the right-hand side: folding 12-volt socket (general example).

The total continuous output of all 12 V sockets in the Volkswagen ID.3 vehicle is 120 watts (→ Sockets) .

The maximum power of a 12 V socket in the vehicle when the vehicle is drive-ready totals 180 watts.

NOTICE

Using 12 V sockets for too long at maximum power can cause the fuse to blow.

• Never use 12 V sockets at their maximum power for longer than 10 minutes.

• Only ever use a single 12 V socket at maximum power.

• Charging Options for Mobile Devices
• Wireless charging function
• Storage compartment cover

Charging Options for Mobile Devices

You can charge mobile devices in the Volkswagen ID.3 vehicle either wirelessly or by using the built-in USB-C connectors.

Charging with USB-C Connectors

The vehicle may contain the following USB -C ports:

Symbol for a USB port for data transmission and charging.

Symbol for a USB port for charging only.

Available Charging Power

Voltages up to 20 V are provided via the USB port, which enables up to 45 W charging power.

Depending on the vehicle equipment, the following charging profiles may be supported by theU SB ports:

• Legacy charging (2.5 W).

• BC1.2 (7.5 W).

• USB -C charging (15 W).

• USB power delivery (up to 45 W).

The actual charging power of the connected device depends on the following aspects:

• Supported charging profiles.

• Device charge level.

• Device temperature.

• Charging cable used.

For double USB ports, the charging power can be split between both ports.

Wireless charging function

Fig. 1 General example: storage compartment with a liner pad for wireless charging in the center console.

1. Shelf with a liner pad.

The wireless charging function depends on the Volkswagen ID.3 vehicle equipment and is not available in all countries.

The wireless charging function uses electromagnetic induction to transfer energy wirelessly over short distances. To use this function, you need a suitable Qi-certified cell phone. To find out whether a cell phone supports the Qi standard, see the cell phone operating instructions. New technologies might not be compatible with the wireless charging function. The manufacturer of the cell phone can offer further information regarding compatibility.

The maximum charging power is 5 watts.

Depending on the vehicle, the rear shelf with liner mat→ fig. 1 (1) for the wireless charging function is located in the center console or between the front seats in a storage compartment.

In some vehicles, the liner mat bears a phone symbol, which indicates the center position for the wireless charging function → fig. 1 (1) . The symbol on the liner mat may look different in some vehicles.

Only a single Qi-certified cell phone without a protective case and with maximum dimensions( width x length) of 80 mm x 140 mm (approx. 3 in x 6 in) should ever be placed flat on the wireless charging function shelf.

Qi-certified cell phones with larger dimensions cannot be charged wirelessly.

Wireless Cell Phone Charging

Requirements

• You must have a suitable cell phone that does not exceed the maximum dimensions and supports the Qi standard.

1. Before charging, remove any foreign objects with metal components, such as coins, from the storage compartment and follow the cell phone operating instructions.

2. Place your cell phone, without a protective case and with the display facing upward, completely flat at the center of the shelf.

The charging process starts automatically.

The Infotainment system informs you when the charging process is starting and, if necessary, if there are any foreign objects with metal components in the storage compartment. Remove foreign objects immediately.

Your Cell Phone Is Not Recognized

If a cell phone is not placed on the shelf correctly or if it is too large, it may not be detected correctly or detected at all. The Infotainment system may notify you of a foreign object in the storage compartment.

If a suitable cell phone is used and its position is corrected, the fault may be eliminated. Remove your cell phone and place it correctly in the storage compartment for the wireless charging function.

Storage compartment cover

Fig. 2 General example: Storage compartment cover (open).

Fig. 3 General example: Storage compartment cover (closed).

Depending on the Volkswagen ID.3 vehicle equipment, the storage compartment for the wireless charging function may have a cover for the cell phone display.

Only a cell phone with maximum dimensions (width x length) of approximately 3 in x 6 in (80 mm x 140 mm), in accordance with the specifications, may be placed in the covered storage compartment.

The cover can prevent you from being distracted by the cell phone, e.g. by incoming notifications.

The cover must always be closed while driving and the display of the cell phone must be completely covered up→ .

If the closing function is not hindered in any way, the cover folds forward automatically without engaging.

The cover must not be prevented from folding forward.

WARNING

Notifications on the cell phone display may distract the driver. This can result in an accident with serious or fatal injuries.

• Place only a single, suitable and Qi-certified (if necessary) cell phone without a protective case and with maximum dimensions (width x length) of 80 mm x 140 mm (approx. 3 in x 6 in), in accordance with the specifications, on the shelf in the storage compartment.

• Remove items that prevent the cover from closing.

• Always keep the cover closed while driving.

WARNING

Metal objects on the shelf can become very hot. This may cause burns or a fire.

• Do not place metal objects or objects with metal components on the wireless charging shelf.

NOTICE

If any ID cards, bank cards or credit cards with a magnetic strip or chip are placed on the wireless charging shelf, the data saved on the magnetic strip or chip could be damaged or become unusable.

• Do not place any ID cards, bank cards or credit cards with a magnetic strip or chip on the wireless charging shelf.