Volkswagen ID.3: Operating the speed limiter

Fig. 1 Left side of the multi-function steering wheel.

Switching on

1. Press the button.

   No speed is saved. At this stage, the limiter will not yet start regulating your speed.

Starting the regulation function

1. Press the button while driving.

   Your current speed will be saved as the top speed.

Setting the speed

You can adjust the saved speed as follows: + 1 km/h (1 mph): Press the button gently.

- 1 km/h (1 mph): Press the button gently.

+ 10 km/h (5 mph): Press the button firmly or swipe it from the bottom to the top. Pressing for the first time changes to the next-largest tens digit (km/h) or fives digit (mph).

- 10 km/h (5 mph): Press the button firmly or swipe it from the top to the bottom. Pressing for the first time changes to the next-smallest tens digit (km/h) or fives digit (mph).

To change the stored speed continuously, press and hold the respective button.

Canceling the regulation function

1. Press the button.

   The Volkswagen ID.3 vehicle speed remains stored in the system.

Resuming the regulation function

1. Press the button.

Switching off

1. Press and hold the button.

   This switches off the speed limiter and the saved speed is deleted.

Switching to other driver assistance systems

Depending on the vehicle equipment, you can switch to the following driver assistance systems:

• Cruise Control System.

• Adaptive Cruise Control (ACC ).

1. Press or swipe the button.

2. Swipe to the left or right to select the system you want.

3.  Press the button.

Troubleshooting

Speed limiter not available

Malfunction or fault. The yellow indicator light turns on.

1. Deactivate the Volkswagen ID.3 vehicle's drive system and activate it again.

2. If the problem persists, switch off the speed limiter and seek assistance from suitably qualified professionals.

   Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

The regulation function is canceled automatically

• ESC is switched off.

• The brakes are overheated. Let the brakes cool down and check the function again.

• If the problem persists, switch off the speed limiter and seek assistance from suitably qualified professionals.

  Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

For safety reasons the speed limiter will only switch off completely once you release the accelerator pedal or switch off the system manually.

Introduction

The speed limiter with predictive control automatically adapts one of your saved maximum speeds to the known speed limits.

The speed limiter with predictive control is an extension of the speed limiter and uses Dynamic Road Sign Display and the navigation data from the Infotainment system.

The speed limiter with predictive control is not available in all countries and may not be available depending on your Volkswagen ID.3 vehicle equipment.

WARNING

The predictive speed limiter is not a replacement for the driver's attention and works only within the system limitations. The predictive speed limiter cannot detect all enforced maximum speed limits and may not react, or may react with a delay, or may react in a way that is not desired. If you are careless, there is a risk of accidents, serious injuries and death.

• Always stay attentive and do not rely solely on the system. The driver is always responsible for the stored speed of the vehicle.

• Observe the system limitations (→ Speed limiter with predictive control) .

• Always adapt your speed to the visibility, weather, road and traffic conditions.

• Keep the navigation data up to date.

• Always observe the maximum permissible speed.

• Note that the speeds regulated by the system do not necessarily conform to your driving style.

Please also observe the safety information for the speed limiter.