Volkswagen ID.3: Lane Assist system limitations

Limits of the sensor system

Lane Assist detects lane markings with the camera behind the windshield.

Observe the limits of the camera (→ Sensor system) . Always be attentive and intervene yourself if necessary!

Lane markings not detected or not correctly recognized

Lane Assist does not correctly detect all lane markings. If lane markings are not detected or if markings are incorrectly detected as lane markings, Lane Assist may fail to intervene when it should or may intervene when not desired. In addition to the situations specified in the camera limitations, this may also occur in the following situations, among others:

• If lane markings are not present.

• When the driving style is very dynamic.

• When not on highways or well-developed roads.

• On poor road surfaces, road structures or objects.

• In the event of reflections or dazzling effects.

Always be attentive and intervene yourself if necessary by overriding unwanted interventions by the system immediately. Temporarily switch off Lane Assist if required.

Lane Assist not available

Lane Assist is not available under the following conditions (inactive system status):

• The Volkswagen ID.3 vehicle speed is less than around 55 km/h( around 30 mph).

• Lane Assist has not detected a lane marking.

• If lanes and curves are too narrow.

• Temporarily, when the driving style is very dynamic.

• When the turn signals are switched on before a manual lane change.

• When the driver oversteers during a system intervention.

• When there is no reaction from the driver to a driver intervention prompt.

  Lane Assist system limitations

Oncoming vehicle braking when turningDriving with Lane Assist