Volkswagen ID.3: Technical data. Alignment jig

• Procedure for structural damage on body
• Alignment jig
• Portal gauge

Procedure for structural damage on body

Procedure for structural damage on body

If body structural damage or deviation from dimensions given in the repair manual is suspected and/or damage is visible to structural components, the vehicle must be placed on a Volkswagen AG approved alignment jig system and measured.

A damaged (dented, cracked, buckled) component and/or the position of the structural component on the body has changed. A structural component includes all components of the body, except outer body panels and components which are bolted on. If dimensions deviate, the vehicle must be repaired according to respective repair manual.

♦ Perform alignment using a straightening bracket set or a measurement and alignment system authorised by Volkswagen AG.

♦ Alignment bracket sets and measurement and alignment systems authorised by Volkswagen AG can be found in ⇒ Electronic parts catalogue (ETKA); TOOLS; Workshop equipment/tools; Body/paintwork.

Alignment jig

Alignment jig

Required special tools, testers, measuring instruments and auxiliary items

♦ Body alignment jig -V.A.G 1920/1-

♦ Straightening bracket system MZ Plus -VAS 6630-

♦ Straightening set -VAS 801 061-

♦ Or:

♦ Measurement and alignment system, basic -VAS 6526-

♦ Measurement and alignment system, professional -VAS 6527-

♦ Measurement and alignment system, professional plus -VAS 6528-

Detailed information on setting up the alignment brackets can be found in the installation plans enclosed with the alignment bracket set.

Portal gauge

Portal gauge

Required special tools, testers, measuring instruments and auxiliary items

♦ Body alignment jig -V.A.G 1920/1-

♦ Portal gauge -VAS 5007-

♦ Portal gauge supplement -VAS 802 099-

Detailed information on setting up the portal gauge can be found in the installation plans enclosed with the alignment bracket set.

Technical data. Body parts and materialsBody front. Longitudinal member cross panel